1. It is caused by unreasonable processing parameters of CNC
If you can see if you can change the processing parameters of the high-speed drilling and tapping machine, it may be that the setting of the parameters is unreasonable.
2, may be the process selection error
On the other hand, an effective way to avoid scratches is to use a boring hole instead of a hole, and the process selection is incorrect.
3, to refer to CNC processing drawings
The first thing you need to see is the machining diagram. If the thickness of the workpiece machined by the CNC machining center is not very thick, you can use a reamer to twist it.
4, there may be problems with chip removal
It is also possible that your coolant has a slow water output and insufficient water, and the chips cannot be discharged.
5, is caused by too high drilling speed
Cnc machining bit angle is well grounded, and the drilling speed is too high
Lemo has over 40 CNC machining centers, include 3 axis,4 axis , 5 axis.
We are expert on Custom metal parts, CNC machined parts, precision machining, aluminum machining, CNC machining ,CNC milling, CNC turning processing, precision grinding and so on.
pls conttact us as below :
Amy Chen
Dongguan Lemo Precision Metal Products Co.,Ltd
Direct Phone: 86-137 1326 2409
Skype: amylemo
Email: amy.chen@lemo-machining.com
URL1: www.lemo-machining.com