The processing method of the surface of the cnc workpiece depends first on the technical requirements of the machined surface. However, it should be noted that these technical requirements are not necessarily the requirements specified in the parts drawing, and may sometimes be higher than the requirements on the part drawing in some respects due to process reasons. If the benchmarks do not coincide, the processing requirements for the surface of some cnc workpieces are increased. Or because of being a fine benchmark, it is possible to impose higher processing requirements on it.

When the technical requirements of the surface of each cnc workpiece are clarified, the final processing method that can ensure the requirement can be selected accordingly, and the processing method requiring several steps and steps can be determined. The selected cnc processing part processing method should meet the requirements of part quality, good processing economy and high production efficiency.

Lemo has over 40 CNC machining centers, include 3 axis,4 axis , 5 axis.

We are expert on CNC machining ,CNC milling, CNC turning processing, precision grinding

 pls conttact us as below :

Amy Chen

Dongguan Lemo Precision Metal Products Co.,Ltd

Direct Phone: 86-137 1326 2409

Skype: amylemo

Email: amy.chen@lemo-machining.com

URL1: www.lemo-machining.com