What Tools will be used for CNC machining parts manufacturing ?

- Nov 19, 2019-

Most of the industries are developing machinery and equipment to complete the work. 

After all, good manufacturers are indispensable of CNC machining parts, If you do not grasp the current development opportunities, the development of the manufacturers may not be so good compared with other ones. 

Relatively speaking, it will lag behind other manufacturers for CNC machining parts, so the work of CNC machining can not fall.


What are the CNC machining parts manufacturing Tools?

What are the tools used in the processing of equipment, the processing of CNC beds, and the tools used?

The coated tungsten steel milling cutter mainly cuts steel and cast iron. Relatively resistant to heat, anti-wear, the price is higher.

 

Drills, this is more common. Includes standard twist drills. Mainly used to play conventional materials. Punching of conventional products. Group drills can play a magical role for some special workpieces. Fixed point drill center drill. Mainly used for point centering.

 

Chamfering tools can generally be replaced by point drills. Mainly used for product chamfering.

 

CNC ball-end tools, mainly used to machine curved products. Of course, special uses are also possible.

 

 CNC boring tools, used to smash the hole. Generally the scale is adjustable. The holes that are mainly used for processing are relatively high in requirements. But compared to a reamer. Will not play a role in pores. Reamer. Mainly to reaming. Generally used for precision hole processing. Can play the role of correcting the verticality of the hole. Face milling cutter. 

Also known as the flying Tools. Milling a large plane. It is also a common tool in machining centers.

 

Round nose Tools, generally open and thick. Can also face milling and so on. The use is relatively wide. Thread milling cutter. The thread can be milled. The thread program can be programmed with programming software. Taps. Product tapping effect. Divided into cutting taps. Spiral tap. Squeeze the tap.

 

The dovetail cutter is named after its shape resembling a swallowtail. Mainly used to open the dovetail slot. Engraving tools. Mainly used for product engraving. Hob. Used to machine holes. It can be made to a mirror finish.

 

T-tools, mainly used to mill T-slots.


For more details, Welcome to check the website : www.lemo-machining.com


Previous:What are the Non-standard parts processing classification based on the national standard ? Next:What are the choices for the positioning of precision CNC machining parts?