Type of wire tapping design for cnc processing technology

- Apr 04, 2019-

1, cnc straight groove tapping (H.TAP): shallow hole, short chip material or sheet metal effect. (hand tapping)

2, cnc apex tapping (P.TAP): the wire tapping lead part has an inclined surface, so that the guiding debris is discharged to the front of the wire tapping during tapping, which is suitable for through hole tapping.

3, cnc spiral wire tapping (S. TAP): through the 10-450 spiral angle chip ditch, the chips are discharged from the blind holes or the stepped holes that are difficult to remove the chips to the rear end of the wire tapping.

4, cnc chipless wire tapping (R.TAP): wire tapping screw teeth are all without chipping ditch (partial specifications have lubrication grooves), the thread is extruded by cold working principle, mostly used for soft materials or light Alloy, also suitable for stainless steel

Lemo has over 40 CNC machining centers, include 3 axis,4 axis , 5 axis.

We are expert on Custom metal parts, CNC machined parts, precision machining, aluminum machining, CNC machining ,CNC milling, CNC turning processing, precision grinding and so on. 

 pls conttact us as below :

Amy Chen

Dongguan Lemo Precision Metal Products Co.,Ltd

Direct Phone: 86-137 1326 2409

Skype: amylemo

Email: amy.chen@lemo-machining.com

URL1: www.lemo-machining.com

Previous:Cnc machining machine coordinate direction discrimination rule Next:What are the benefits of CNC lathe machining?