The automatic ultrasonic duckbill mask machine (duckbill mask making machine) is a machine that uses the principle of ultrasonic seamless welding to produce duckbill masks suitable for high-pollution industries. This machine mask body part can use 4~10 layers of PP non-woven fabric and filter materials (such as: melt blown cloth, activated carbon material, etc.), so that it can produce finished mask products with various filter levels such as N95, FFP2. And this machine has a very high degree of automation. From feeding to finished products, it is a one-line automatic operation: raw materials are automatically fed, an independent nose line conveying system, and the nose line can be automatically folded in the non-woven fabric, and automatically folded And the finished product is cut, and the breathing valve hole can be added automatically. The finished product produced by this duckbill mask machine has beautiful appearance; the machine has stable performance, high output, low defect rate and easy operation.
Duckbill mask machine features:
1. Fully automatic feeding system
2. Folding forming system
3. Ultrasonic heat sealing system
4. The whole machine has stable performance, continuously adjustable production speed, high production efficiency, up to 60 pieces per minute, convenient and accurate counting, high raw material utilization, simple and convenient operation and adjustment, high automation, and effective reduction of labor costs.
Bandage mask machine
Ultrasonic mask banding machine adopts ultrasonic welding method. A conveying device is installed on the machine. The semi-finished mask is fed into the conveying device. After being wrapped by a drawing tube, the band is cut off by an ultrasonic flower wheel to output the finished product. One person needs to place the mask body on the conveyor belt of the machine, and the rest of the subsequent work is done automatically.
Features of Ultrasonic Mask Banding Machine:
1. The frame is made of aluminum alloy and stainless steel, and the appearance is light and beautiful without rust.
2. Automatic counting, which can effectively control production efficiency and production progress.
3. Frequency conversion control can adjust the operating speed of the equipment according to actual needs.
4. Pulling the tube to feed the material, the positioning is more precise, the width of the raw material can be controlled to the minimum, and the cost is saved.
5. The length and dimension of the finished product are uniformly controlled with a deviation of ±1mm, which can effectively control the length of the finished product.
6. The equipment has a high degree of automation and low requirements on the operating staff. It only needs to discharge materials and arrange finished products.
7. This machine adopts ultrasonic Taiwan system, Japanese transducer, stable performance and convenient operation.
8. The automatic ultrasonic welding wheel is made of imported high-quality steel DC53, which prolongs the life of the mold and is wear-resistant and durable.
Outer ear mask machine
The outer ear mask machine ultrasonically fuses the elastic bands on the two outer sides of the mask body to complete the earband mask product. Only one operator needs to place the mask body piece by piece on the conveyor belt jig, and the rest of the subsequent actions are completed to the finished product. All are automatically operated by the machine, and the output of this machine is higher than that of ordinary earband machines.
Parameters of ultrasonic outer ear mask machine:
Machine size: 2646(L)*620(W)*1750(H)m/m
Voltage: Single-phase 220V
Air pressure: 6kg/cm2
Power consumption: 3KW
The size of the mask body must be fixed
Features of ultrasonic external ear mask machine:
1. The machine is compact, small in size and does not occupy space;
2. PLC program control, high stability, low failure rate;
3. The whole machine adopts aluminum alloy structure, which is beautiful and firm without rust;
4. Photoelectric detection reduces the error rate.
5. The welding strength of the ear straps is adjustable.